Showing posts with label blower for fireplace insert. Show all posts
Showing posts with label blower for fireplace insert. Show all posts
Tuesday, December 9, 2014
Discount Medium Heat-Reflecting Fireplace Bright Reflectors
It looks pretty during a fire, but I don't notice much difference in the amount of heat coming from the fire. Our fireplace is dual sided and fairly deep so much of th heat from a fire escapes up rather than warming the rooms. I purchased the reflector with the anticipation that it would help defelct some of the heat out into the rooms. Unfortunately, I didn't ntoice much a difference so I don't think it is worth the realtively steep price and shipping expense.
Thursday, October 2, 2014
Discount Woodeze 5DA-ER12 Ember Retainer for Grates
Customer Ratings: 
List Price: $14.00
Sale Price: $10.00
Today's Bonus: 29% Off

They solved my problem and got us through the winter after our old grate broke. I would buy more of these. I'm in a rental that uses wood for heat. I figured out that this ember retainer keeps it all together and hotter longer. It's heavy guage (not bendable) so order the one that's the right size. Thanks for solving the stray-coal problem.
List Price: $14.00
Sale Price: $10.00
Today's Bonus: 29% Off
They solved my problem and got us through the winter after our old grate broke. I would buy more of these. I'm in a rental that uses wood for heat. I figured out that this ember retainer keeps it all together and hotter longer. It's heavy guage (not bendable) so order the one that's the right size. Thanks for solving the stray-coal problem.
Friday, August 29, 2014
Cheap SEI Tennyson Gel Fuel Fireplace with Bookcases
Recieved this fireplace very quickly and it came with no damage to it. It was very easy to assemble except there are three hole in the front which I am not sure what they are for, but you can't really see them. The color matches my existing furniture perfectly. I would recommend this product to others.
Click Here For Most Helpful Customer Reviews >>
I bought this to keep the house warm while making it look really nice under our TV. This was very difficult to put together. Even with 2 people. It did snap, so we had to screw it in a different spot. You can not tell. It is in the back. It heats the house as long as you have all 3 cans going at the same time. The cans only last for 2-3 hours. It does look nice after it is all said and done.Best Deals for SEI Tennyson Gel Fuel Fireplace with Bookcases
Definitly the best deal out there , easy to put together and will last a long time. thank you so muchThursday, August 14, 2014
Review of Sengoku CV-2230 KeroHeat Convection 23,000-BTU Portable Kerosene
Customer Ratings: 
List Price: $139.00
Sale Price: $136.81
Today's Bonus: 2% Off

I live in a very isolated rural area and my local electric co-op is less than dependable. The power went out for 7 hours once because of a windy day. I have a bad feeling about this winter so I decided to buy a kero heater in case the power goes out. I live in a small trailer that has electric everything. My grandparents used to have a KeroSun that was great so I looked for those and found that the company is out of business, so I tried to find one with good user reviews that was as close to that design as possible. The Sengoku CV-2230 looked promising.
Having never done it before, assembling the heater was a nightmare, though they thoughtfully pre-installed the wick. One big down-side I noticed right away was the flimsy handle. It's a big heater and I'm afraid to pick it up with that handle, especially when it's full. They have small "U"-shaped clamps at the hardware store that I'll attach to each end of the handle where they fit into the holes in the body so the handle can't come out. That should make me feel a little better.
Follow the instructions. Fill and light this heater *outside*, let the flame settle, then bring it in. Don't forget the part where it says to let the entire first tankful burn outside so that the varnishes and residues left from manufacturing burn off and don't create noxious fumes.
When the flame was fully-lit I turned it down and brought the heater indoors. I found that the flame was too high even on the lowest wick-stop setting AND burned mostly on the left and right with practically no flame front and back. The flame was much higher on the right, also. I fiddled with it to no avail and realized the wick needed some surgery. So I disassembled the whole thing to get the wick, lowered the entire wick about 1/8" and gave it a haircut with a good, sharp pair of scissors so the top was even all the way around. It proved impossible to adjust the wick so that the space between the wick and the metal collar is even all the way around so I just said forget it and reassembled the heater.
The operation was a success. You still have to move the burner around and try different seating positions to get the flame to burn as evenly around the edge of the disk as possible but it can be done. The flame of my heater is now 1/2" high all the way around (as recommended), more or less.
Like the fellow above mentioned, this heater puts out a LOT of heat. I read some reviews that complained that the unit falls far short of its 23,000 BTU rating but it was obviously meant to heat a bigger space than my trailer. I leave two windows open on opposite sides of the room for cross-ventilation, otherwise it sucks all the O2 out the air and the heat drives me out of my home. My Doberman loves it, however, and lays about two feet away from it. They're cold-blooded dogs furry lizards, so this heater makes a terrific dog toaster. One trick I use is to turn on just the blower of my central heat/AC to move the warm air around the whole place. BTW, you can raise the humidity in your home by 10% by doing the same thing, turning the shower nearest the heater intake vent on hot for ten minutes.
Took some fiddling but it works adequately and the price was right. Watch out for that handle. As far as I know, the next thing up is a refurbished KeroSun, and that'll cost you.
This Kerosene heater is very easy to use, requires minimal maintenance, and puts out a LOT of heat fast. Only real smell is at start-up and especially at shutdown, but if you take the heater outside to start and stop, actual in use smell is almost zero if you use it properly. By properly for my particular unit means flame height as high as possible w/o curling (sooting), and adjusting the burner. Quality of the fuel obviously is a factor, and I have had pretty good luck with the un-dyed K-1 from several stations. With good fresh K-1 fuel, and the unit adjusted properly at operating temp, there is no odor, or so faint I have to try and smell for it, and there has absolutely never been any sooting. You will learn how to adjust the unit as the fuel warms/unit gets hotter, and really enjoy the experience. My family enjoys the soft steady glow the heater makes, and it's nice steady heat, not the on/off feeling from central.
Although the product is perfectly safe for indoor use, I do use and highly recommend a CO detector, never sleeping with the heater on, and not have it too far from where you are to be able to keep an eye on it.
Pro's not mentioned:
Actual use times relative to consumption seem longer than stated. I have used it 12 hrs straight, and no way used close to all the fuel. Seems the fuel gage reads "F" way before the tank is actually full, and "E" well before actually empty.
Extra wicks if needed are very easy to get, but I don't see the need for a new one anytime soon if you "dry burn" as is required every so often.
Lots of safety is built into the unit, and it does have an auto shut off should it fall over
No electricity needed, so they are the perfect "blackout" heating solution
2 yr warranty
Cons:
Contact made to Sengoku USA by email has never been returned, so there may be CS issues down the road
Although generally well made, there are some issues, especially the carrying handle. It flexes a lot especially when the heater is full of fuel, and the handle can slip out because the holes in the side of the heaters sheet steel get wallowed out. To stop this I installed some wire clips, and so far so good.
For our situation (no nat gas available), this heater was the best choice over paying for propane to be installed, or using the creosote laden fireplace. I read a lot of hype, hyperbole, and flat out BS about the dangers of using a Kerosene heater indoors... Yeah, they must really be death machines seeing how the Japanese by the tens of millions use them almost exclusively for primary heating of their non central heat homes. Bottom line, learn how to safely use them/maintain them, and you will be rewarded with plenty of economical heat.
I have had this brand before and they are long lasting.
It is much more efficient on fuel than I thought too. If you are having a problem with it consuming too much kerosene, then dont keep it on "hi" all of the time moving the knob to a lower burn will produce almost just as much heat. I used to keep it at high until I realized I didnt have to.
Also, we add a product that you can buy at Wal-Mart, or anywhere on the net that costs about $4.00 per bottle. It keeps the wick clean, takes away ANY kerosene fume smell from burning kerosene, and seems to make the kerosene last a little longer. You only add 1oz per 5 gallons of Kerosene.
I really like how the electric igniter works flawlessly. The fuel gauge is accurate and the fuel cap is tethered with a chain, so you wont lose it.
If you are on the fence about the 2230, be assured after you try it out you will be telling people what a great deal you got and "they don't make 'em like this anymore!" because it really is a quality workhorse.
Pumps out tons of heat and the lighter works flawlessly. It's well made, though the handle isn't stiff enough for the heater's weight. If you're not careful when carrying the heater with full fuel, the handle can slip and detach, dropping the heater. Used within its limitations, it's the best heater of its type out there.
List Price: $139.00
Sale Price: $136.81
Today's Bonus: 2% Off
I live in a very isolated rural area and my local electric co-op is less than dependable. The power went out for 7 hours once because of a windy day. I have a bad feeling about this winter so I decided to buy a kero heater in case the power goes out. I live in a small trailer that has electric everything. My grandparents used to have a KeroSun that was great so I looked for those and found that the company is out of business, so I tried to find one with good user reviews that was as close to that design as possible. The Sengoku CV-2230 looked promising.
Having never done it before, assembling the heater was a nightmare, though they thoughtfully pre-installed the wick. One big down-side I noticed right away was the flimsy handle. It's a big heater and I'm afraid to pick it up with that handle, especially when it's full. They have small "U"-shaped clamps at the hardware store that I'll attach to each end of the handle where they fit into the holes in the body so the handle can't come out. That should make me feel a little better.
Follow the instructions. Fill and light this heater *outside*, let the flame settle, then bring it in. Don't forget the part where it says to let the entire first tankful burn outside so that the varnishes and residues left from manufacturing burn off and don't create noxious fumes.
When the flame was fully-lit I turned it down and brought the heater indoors. I found that the flame was too high even on the lowest wick-stop setting AND burned mostly on the left and right with practically no flame front and back. The flame was much higher on the right, also. I fiddled with it to no avail and realized the wick needed some surgery. So I disassembled the whole thing to get the wick, lowered the entire wick about 1/8" and gave it a haircut with a good, sharp pair of scissors so the top was even all the way around. It proved impossible to adjust the wick so that the space between the wick and the metal collar is even all the way around so I just said forget it and reassembled the heater.
The operation was a success. You still have to move the burner around and try different seating positions to get the flame to burn as evenly around the edge of the disk as possible but it can be done. The flame of my heater is now 1/2" high all the way around (as recommended), more or less.
Like the fellow above mentioned, this heater puts out a LOT of heat. I read some reviews that complained that the unit falls far short of its 23,000 BTU rating but it was obviously meant to heat a bigger space than my trailer. I leave two windows open on opposite sides of the room for cross-ventilation, otherwise it sucks all the O2 out the air and the heat drives me out of my home. My Doberman loves it, however, and lays about two feet away from it. They're cold-blooded dogs furry lizards, so this heater makes a terrific dog toaster. One trick I use is to turn on just the blower of my central heat/AC to move the warm air around the whole place. BTW, you can raise the humidity in your home by 10% by doing the same thing, turning the shower nearest the heater intake vent on hot for ten minutes.
Took some fiddling but it works adequately and the price was right. Watch out for that handle. As far as I know, the next thing up is a refurbished KeroSun, and that'll cost you.
Click Here For Most Helpful Customer Reviews >>
Our large, drafty, almost uninsulated rental home has a heat pump for "heat", and after one winter of freezing to death we bought this heater... Boy, is it nice to be warm again with REAL heat! We had blocked off rooms and used electric heaters before, and at times supplemented it with the central system which had to use resistance heat at the tune of $2.00 and HOUR to run. Seemed the second the central unit went out, the house was freezing again.This Kerosene heater is very easy to use, requires minimal maintenance, and puts out a LOT of heat fast. Only real smell is at start-up and especially at shutdown, but if you take the heater outside to start and stop, actual in use smell is almost zero if you use it properly. By properly for my particular unit means flame height as high as possible w/o curling (sooting), and adjusting the burner. Quality of the fuel obviously is a factor, and I have had pretty good luck with the un-dyed K-1 from several stations. With good fresh K-1 fuel, and the unit adjusted properly at operating temp, there is no odor, or so faint I have to try and smell for it, and there has absolutely never been any sooting. You will learn how to adjust the unit as the fuel warms/unit gets hotter, and really enjoy the experience. My family enjoys the soft steady glow the heater makes, and it's nice steady heat, not the on/off feeling from central.
Although the product is perfectly safe for indoor use, I do use and highly recommend a CO detector, never sleeping with the heater on, and not have it too far from where you are to be able to keep an eye on it.
Pro's not mentioned:
Actual use times relative to consumption seem longer than stated. I have used it 12 hrs straight, and no way used close to all the fuel. Seems the fuel gage reads "F" way before the tank is actually full, and "E" well before actually empty.
Extra wicks if needed are very easy to get, but I don't see the need for a new one anytime soon if you "dry burn" as is required every so often.
Lots of safety is built into the unit, and it does have an auto shut off should it fall over
No electricity needed, so they are the perfect "blackout" heating solution
2 yr warranty
Cons:
Contact made to Sengoku USA by email has never been returned, so there may be CS issues down the road
Although generally well made, there are some issues, especially the carrying handle. It flexes a lot especially when the heater is full of fuel, and the handle can slip out because the holes in the side of the heaters sheet steel get wallowed out. To stop this I installed some wire clips, and so far so good.
For our situation (no nat gas available), this heater was the best choice over paying for propane to be installed, or using the creosote laden fireplace. I read a lot of hype, hyperbole, and flat out BS about the dangers of using a Kerosene heater indoors... Yeah, they must really be death machines seeing how the Japanese by the tens of millions use them almost exclusively for primary heating of their non central heat homes. Bottom line, learn how to safely use them/maintain them, and you will be rewarded with plenty of economical heat.
Best Deals for Sengoku CV-2230 KeroHeat Convection 23,000-BTU Portable Kerosene
With deep winter upon us, these are great alternative heaters for people on electric heat. They provide 23,000 BTU more than enough to heat 2-3 easily. VERY hot. Foutchie loves to roast her fur next to it. Runs for about 12 hours, a little longer if you cut it back. Easy refill, good protective guard. I have paid $50 more for ones not as high quality.I have had this brand before and they are long lasting.
Honest reviews on Sengoku CV-2230 KeroHeat Convection 23,000-BTU Portable Kerosene
We use the Kero-Heat 2230 to heat the lower level of our 2600 sq ft home, built in 1940. I did not have high hopes for it at first, and was really expecting it to chug black clouds of kerosene fumes and be high maintenance with wick replacements, soot, etc. In reality, this is the cleanest burning kerosene heater Ive ever witnessed work! We keep our heat at 60f and this heater will heat the downstairs to 72-74f degrees. Its amazing.It is much more efficient on fuel than I thought too. If you are having a problem with it consuming too much kerosene, then dont keep it on "hi" all of the time moving the knob to a lower burn will produce almost just as much heat. I used to keep it at high until I realized I didnt have to.
Also, we add a product that you can buy at Wal-Mart, or anywhere on the net that costs about $4.00 per bottle. It keeps the wick clean, takes away ANY kerosene fume smell from burning kerosene, and seems to make the kerosene last a little longer. You only add 1oz per 5 gallons of Kerosene.
I really like how the electric igniter works flawlessly. The fuel gauge is accurate and the fuel cap is tethered with a chain, so you wont lose it.
If you are on the fence about the 2230, be assured after you try it out you will be telling people what a great deal you got and "they don't make 'em like this anymore!" because it really is a quality workhorse.
Find helpful customer reviews and review ratings for Sengoku CV-2230 KeroHeat Convection 23,000-BTU Portable Kerosene
I like this heater, and use it, but find that I cannot use it indoors without tripping my smoke alarms. That's after rigorously adjusting the heater for a clean burn, warming it up for a half-hour in the garage first, and even using odorless fuel. Mind you, the heater isn't smoking far from it. It's as clean a burn as I've ever seen from a kerosene heater. Nonetheless, I can't use it indoors period. So I use it in a machine shed where I don't have the issue. Your mileage may vary.Pumps out tons of heat and the lighter works flawlessly. It's well made, though the handle isn't stiff enough for the heater's weight. If you're not careful when carrying the heater with full fuel, the handle can slip and detach, dropping the heater. Used within its limitations, it's the best heater of its type out there.
Friday, June 6, 2014
MEECO'S RED DEVIL 432 Gel Firestarter Review
good product for use in starting pellet stoves especially for those that are difficult to start. Recommend Meeco's over others I have tried.
The electric ignitor on my pellet stove finally gave out after 5 years so we were forced into doing manual starts. Unfortunately, I learned manually lighting pellets just doesn't happen very fast even with butane lighters, paper, or those wood/wax fire starters I've used successfully outside in my fire pit. But, with just a small squirt of this gel, it covers, and SURROUNDS a few of the pellets and lights them instantly. By the way, I did order a replacement ignitor but the gel will due while we wait. FYI I attached a little video showing how quickly this gel lights my pellet stove.
Click Here For Most Helpful Customer Reviews >>
One Match is far better than the other firestarters I have used. It is easy , lights quickly and it dosen't evaporate. Great product.Best Deals for MEECO'S RED DEVIL 432 Gel Firestarter
Really good starter gel! It doesn't burn out and the fire in our pellet stove starts on the first try! Much better than the other starter gel we had been using (One Match). The only drawback is that it leaves an awful smell on your fingers if it gets on you.Honest reviews on MEECO'S RED DEVIL 432 Gel Firestarter
The electric ignitor on my pellet stove finally gave out after 5 years so we were forced into doing manual starts. Unfortunately, I learned manually lighting pellets just doesn't happen very fast even with butane lighters, paper, or those wood/wax fire starters I've used successfully outside in my fire pit. But, with just a small squirt of this gel, it covers, and SURROUNDS a few of the pellets and lights them instantly. By the way, I did order a replacement ignitor but the gel will due while we wait. FYI I attached a little video showing how quickly this gel lights my pellet stove.
Find helpful customer reviews and review ratings for MEECO'S RED DEVIL 432 Gel Firestarter
I tried One Match because it was less expensive than the other products that I have tried in the past. Big Mistake! I was very disappointed in the product.Friday, May 2, 2014
Reviews of Uniflame 29.5 in. Black Finish Tongs with Crook Handle
Customer Ratings: 
List Price: $27.99
Sale Price: $18.58
Today's Bonus: 34% Off

saves a lot of burns loading the wood stove. Enough leverage to hold log on end. Only one nit: the rivet for the pivot will break. I replaced mine with a 5 mm stainless bolt, washers, and nyloc nut and did the same for the others before I gave them away.
List Price: $27.99
Sale Price: $18.58
Today's Bonus: 34% Off
saves a lot of burns loading the wood stove. Enough leverage to hold log on end. Only one nit: the rivet for the pivot will break. I replaced mine with a 5 mm stainless bolt, washers, and nyloc nut and did the same for the others before I gave them away.
Friday, December 27, 2013
Cheap Pearl Mantels Williamsburg Wood Fireplace Mantel Surround
Customer Ratings: 
List Price: $599.99
Sale Price: $326.00
Today's Bonus: 46% Off

This mantle exceeded my expectations. No need to go into great detail, but here are the bullets:
* The packaging was excellent and very protective.
* The mantel was made from solid wood not pressboard with a laminate.
* The quality of the wood was excellent.
Do I have any negative comments? (maybe) because of the above qualities, the package was so heavy that my wife had to help me carry the box into the house. Yes very heavy and made in China, but the shipping was free!
List Price: $599.99
Sale Price: $326.00
Today's Bonus: 46% Off
This mantle exceeded my expectations. No need to go into great detail, but here are the bullets:
* The packaging was excellent and very protective.
* The mantel was made from solid wood not pressboard with a laminate.
* The quality of the wood was excellent.
Do I have any negative comments? (maybe) because of the above qualities, the package was so heavy that my wife had to help me carry the box into the house. Yes very heavy and made in China, but the shipping was free!
Friday, December 20, 2013
Cheap Small Vent-Free Birch Logs
I purchased this along with the gel fuel a little over a year ago because it was too hard to open and close my fireplace flue and am so glad I did, this product adds such nice ambience and even throws off a small amount of heat. I've held several parties since I've had it and no one realized that it was "fake" until I told them; now my neighbors want it also instead of carting in wood or fake logs. I use this every night during the cold weather and love it, the dancing flames and occasional pop of the fire changes the whole atmosphere of the room, I just peel the label off the can, shake it up and light it; as long as I do those things there is not any bad smell. Enjoy!
Thursday, November 21, 2013
J-23 23x18 Cast Grate Reviews
Customer Ratings: 
List Price: $73.69
Sale Price: $49.00
Today's Bonus: 34% Off

Looked into buying the a self feeding grate but was unsure if it would fit the dimensions of my metal fab fireplace.. Purchased this one instead and I couldn't be happier at less than half of the price.. It is a heavy solid and well build fireplace grate that will last for many many years..
List Price: $73.69
Sale Price: $49.00
Today's Bonus: 34% Off
Looked into buying the a self feeding grate but was unsure if it would fit the dimensions of my metal fab fireplace.. Purchased this one instead and I couldn't be happier at less than half of the price.. It is a heavy solid and well build fireplace grate that will last for many many years..
Click Here For Most Helpful Customer Reviews >>
Looks good, works good, rced in a a timley fashion, no complaints ! a a a a a a aBest Deals for J-23 23x18 Cast Grate
Seems like a silly thing but I have had cheesy fireplace grates. This one is solid and I like the enclosed edges. It makes it last longer. I always have fires going and this has proved to last over 6 years. I just now had to replace it and bought the same one.Honest reviews on J-23 23x18 Cast Grate
I purchased this grate as a replacement for my fireplace as the older grate had finally gotten so hot the legs and middle bent down. This product was delivered as promised and I have been very satisfied with the grate as it has performed as advertised. It is heavy duty and not light like the previous grate I purchased from one of the chain home improvement stores. I am now in my second year of using it and will recommend this grate to anyone who needs a replacement as I did.Wednesday, November 20, 2013
Review of Enclume Long Fireplace Tools
Customer Ratings: 
List Price: $170.99
Sale Price: $119.99
Today's Bonus: 30% Off

While these Enclume tools are attractive and well made, you don't actually get what's shown in the photo. The tongs are not the 3-prong type shown, made of square stock like the other tools. Enclume now ships a cheaper, 2-prong tong, that does not grasp the logs nearly as securely as the former style. It's also made of flat stock, and differs in appearance from the other tools. Enclume makes no disclaimer that the tongs different, even on their own website. "Tongs is tongs" is their position.
If you are buying these tools for looks, fine. If you want functional tools for moving hot logs, think twice. I am stuck, mine came from a reseller who wants $$ for returning them.
List Price: $170.99
Sale Price: $119.99
Today's Bonus: 30% Off
While these Enclume tools are attractive and well made, you don't actually get what's shown in the photo. The tongs are not the 3-prong type shown, made of square stock like the other tools. Enclume now ships a cheaper, 2-prong tong, that does not grasp the logs nearly as securely as the former style. It's also made of flat stock, and differs in appearance from the other tools. Enclume makes no disclaimer that the tongs different, even on their own website. "Tongs is tongs" is their position.
If you are buying these tools for looks, fine. If you want functional tools for moving hot logs, think twice. I am stuck, mine came from a reseller who wants $$ for returning them.
Subscribe to:
Posts (Atom)