Showing posts with label fireplace inserts. Show all posts
Showing posts with label fireplace inserts. Show all posts

Tuesday, December 16, 2014

Review of Duraflame Infared Quartz Electric Portable Heater Air Purifier

Duraflame Infared Quartz Electric Portable Heater Air Purifier Colby - Cherry
Customer Ratings: 4 stars
List Price: $249.99
Sale Price: $189.99
Today's Bonus: 24% Off
Buy Now

This heater is very well made and is not made for instant heat, and it takes about an hour and it heats the air and objects. I am heating 2000 square feet with two of these heaters and the weather has gotten down to 20 degrees and heats the house just fine and stays about 72 degrees in the house I am very pleased with the overall way they work. If you are expecting instant heat in a short period this is not the heater for you it takes a little bit.

Click Here For Most Helpful Customer Reviews >>

In my quest to lower my oil heating bill, @ $4 per gallon, I did an extensive investigation of supplemental space heating solutions.

I bought a DeLonghi TRD0715T oil-filled radiator and a Vornado AVH2 Vortex Whole Room Heater. I also have my 20+ year old Pelonis 4-Disc Furnace--my trusty old Pelonis does not have thermostatic control, only a High/Low switch--I wanted a heater that had automatic control so I could "set and forget.".

The Eden Pure brochure got me interested in Infared Quartz heating. The Eden Pure sounded enticing, but I thought it over-priced, and the extensive research I did indicated there are better and cheaper alternatives in IQ heating.

After checking comments on different brands of IQ heaters, I settled on the Duraflame Colby and decided to buy from a local retailer (Fortunoff Backyard Store) rather than online because if it did not work out, I did not want to pay shipping to return it.

Instead of one unit, I bought two of them since the retailer was liquidating them as end of season merchandise--if I wanted/needed a second one later on, they would be out-of-stock. I have only set up one of them to test. I bought it at a $175 price.

The Duraflame Colby seems well built, with a nice wood cabinet. Sitting 6 feet away, I can feel the warmth, and the unit cycles on and off. However, before it cycles off, it runs to cool itself off internally and is thus blowing cool air. The built-in thermostat is reasonably accurate, when measured against an external thermometer. Whether it can heat 1,000 sq. ft. is still questionable, and perhaps doubtful, and whether it can do so at favorable electric cost is not apparent at present. Since I have only had it for a little over a week, I cannot comment on its durability. It does have a 3-year warranty, and the quality and packaging was good--perhaps an indicator of quality. I am glad I did not buy the Eden Pure--the Colby is so much cheaper.

I am concerned about electricity use since the entire purpose of my experiment is to substitute expensive oil heat with electric heat in the hopes of achieving immediate savings.

These space heaters are considered an investment and need to generate enough savings in one winter, over and above their purchase price, to justify their use. While I may use these heaters for many years to come, I am only considering the investment return horizon as one winter--the space heaters have to generate savings in one winter--my oil usage has to decline dramatically, and my electricity usage should not be tremendously higher in offset. I am investing $600 in heaters and need to recover this cost plus the incremental increase in electricity just to break even. Increasing the time horizon or alternatively figuring in an end-of-horizon salvage value may be reasonable but immediate payback is what I am after.

My plan is to keep my 2 zone thermostats at 60 degrees, and use the space heaters to push the temperatures on both levels of the house above that. I may even lower the house thermostats lower than 60 degrees after I see my electricity bill.

So far, it is still early on in my experiment since I have not received my most recent electricity bill to gauge usage. In addition, it has not been really that cold outside yet. I will update my comments as I gain more experience. In October and December, with mild temperatures, I got two oil fill ups totaling $1,100, so I am super motivated.

So far, these are my findings.

I will need to return the Vornado Whole Room heater, if I can. Judging from the dimming of lights, the Vornado uses a lot of electricity but generates little warmth. My old Pelonis heats up a room much, much quicker. The Vornado is also only suited for a small room, and I think it will use a lot more electricity to heat up the same amount of space that the Duraflame Colby does.

The Delonghi seems to consume less electricity. It generates strong heat off of the top, rising upwards. The lights don't dim as much, and it seems to be able to heat a large area if kept on continuously. I could use it in a smaller area as a continually on device. I may add a fan to circulate the heat. It is a keeper.

The Pelonis is the most efficient--instant and rapid heating. I plan to buy another B-6A1 classic 4 Disc Furnace with thermostatic control, although I am apprehensive that the new ones do not have the same build quality of my original--that original is over 20 years old and still functioning like new. Nothing is built like it used to be. That the warranty now is only 1-year, down from 3-years, which is down from 7-years is an indication of build quality. My original one was made in Taiwan; the new ones are made in China.

If the new Pelonis performs as well as the old one, it will definitely out-perform the Vornado, as it generates more heat in a shorter timeframe thus saving electricity, and with thermostatic control, I would not have to monitor it like I have to do so with my original Pelonis without automatic control. Thus the Vornado definitely has to be replaced.

I will use the Pelonis to rapidly heat a room as needed, and the Durflame Colby to maintain the larger spaces at an even temperature level, and keep the house oil furnace set at a base temperature level.

I will inform later on how this strategy and experiment works out.

UPDATE--OBJECTIVE COMPARISON TEST RESULTS: 1/12/2012

I have had the chance to make an objective comparison, and make further observations about the Colby, along with the other space heaters. I did an objective comparative test of the four space heaters I own, holding as many factors constant as I could.

I used the same room, an enclosed (door closed) 160 sf room, and placed the same thermometer in the same location during each phase of the test. The outside temperature was relatively constant throughout the test periods. I started each phase of the test at the same base level temperature of 60 degrees, and timed the test for 30 minutes for each type of heater. I recorded the increase in temperature achieved by each heater at the end of 30 minutes.

These are the findings:

Duraflame IQ Colby: (60 degrees to) 67 degrees, 7 DEGREE increase (in 30 minutes).

DeLonghi Oil-filled Radiator (pre-heated--non-cold, plus external circulating fan): 66 degrees, 6 DEGREE increase.

Pelonis 4-Disc (20+ year-old unit): 64 degrees, 4 DEGREE increase.

Vornado Whole Room Vortex: 67 degrees, 7 DEGREE increase.

The results were surprising:

Subjectively, I had thought the Pelonis would raise the temperature the most, since its heat is instant, intensely hot at close distance and it just subjective felt warmer. I will repeat the test with the new Pelonis I ordered when it arrives--maybe because it is 20 plus years old, the output is diminished, even though it seems as strong as when new.

I was impressed that the Delongghi achieved a 6 degree increase (I started with a warmed up Delonghi and not from a cold start because the DeLonghi needed time to heat the oil, and I added an external circulating fan since the Delonghi's heat only comes out of the top and hot air rises--thought this would make it more comparable, as the thermometer is resting on a bed and not hanging from the ceiling, and it does not have a fan to circulate).

I was surprised that the Vornado was able to match the 7 degree increase of the Duraflame Colby. The Vornado is not promoted as a large area heater--just as a "whole room heater." The mfg. rated output is 5,118 BTU's. I was going to return it, but based upon the test results, I've changed my mind.

The Duraflame Colby in comparison is somewhat of a disappointment. It is rated at 5,200 BTU's, matching the Vornado, but promoted as a 1,000 sf heater. I would have expected it to be able to raise the temperature the most (fastest) since it is promoted as a large space heater, thus presumably more capable of pushing out more heat--but it just matched the Vornado.

In using the Colby to heat my upstairs area, about 800 sf, I had noted that the temperature did not rise much in spite of continuously running on cycle. Given this objective test, I can only conclude that the Colby would not be able to heat 1,000 sf, and is at best a small/medium room heater. That being the case, I am not going to keep the second unit I purchased to heat large space. I have a call in to Twinstar--the manufacturer--to see what they say--to see if I have a defective unit or whether such performance is what is to be expected.

Given the results, the Colby is not a good value (typical retail at $200 plus shipping, althought I bought it for $175 plus tax=$190), being twice the price of the Vornado at $98--I got the Vornado from Hammacher Schelmmer at $120 plus shipping--one pays more at HS than Amazon. The DeLonghi is the best value--I bought it from Amazon for $68. The new Pelonis (to be received yet) was purchased at a cost of $75.

I hope the above test results will be helpful to prospective purchasers. An objective test certainly changes subjective perceptions--ie, it reversed my opinion of the Vornado's effectiveness, and I am going to keep rather than return it. It makes my decision on keeping the second Colby easier--it will not do what I expected it to do, heat a large space. The DeLonghi is confirmed as a keeper. Too bad about the Duraflame Colby--I like it and had hoped it would heat large space, and wanted to keep both units. Now I will just keep one for small space heating. I lowered my rating from 5 stars to 3 stars, taking off one star for performance and one star for manufacturer's stipulations not met.

FURTHER UPDATE: 01/13/2012

JUST GOT MY NEW PELONIS 4 DISC FURNACE TODAY. DID COMPARATIVE TEST LIKE BEORE. THE NEW PELONIS WAS ABLE TO RAISE THE ROOM TEMPERATURE BY 7 DEGREES FROM 60 DEGREES, AS OPPOSED TO ONLY BY 4 DEGREES WITH THE OLD PELONIS, ALL OTHER THINGS HELD EQUAL. RE-TEST OF THE OLD PELONIS CONFIRMED 4 DEGREE RISE ONLY.

However new Pelonis has awful smell--hope it outgases. Sides of new Pelonis gets warm, unlike the old Pelonis, which stay cool. Case, grill and cord on new Pelonis all inferior to old Pelonis.

In summary:

Duraflame 7 Degrees

Vornado 7 Degrees

DeLonghi 6 Degrees

Pelonis New 7 Degrees

Pelonis Old 4 Degrees

In summary:

Thus all types pretty much comparable in 30 minute test. BTU rating is determinant of heating ability. So beyond hype and claims of marketers and manufacturers, it is a matter of features and value.

Re the Duraflame Colby, it cannot heat 1,000 sf; for about 600 sf open area, it runs non-stop for hours and only manages to raise temp 1 to 2 degrees, when house heating is set at 60 degrees--had to supplement with Vornado and/or Pelonis to further raise temperature, thus running multiple heaters for the same space--defeats the purpose--might as well raise the house thermostat.

The Colby is best used as a small/medium sized enclosed room portable heater--but as such, the other alternatives do equally well.

A call to the manufacturer, Twinstar, to check if I have a defective unit, did not result in a timely response--still waiting. Will definitely return the second unused unit.

UPDATE: 11/30/2012

The remote failed to work. Changed batteries, still no luck. Contacted Twinstar and the telephone answerer took the model and my personal information and said a technician will contact me about sending out a new remote--strange procedure--I guess they outsource customer support. Will update further when remote received, and if it solves the problem.

Best Deals for Duraflame Infared Quartz Electric Portable Heater Air Purifier

I had this heater for a month now and have used it on and off this fall. I wanted to use it to heat a 825 sq foot area. The heater could not heat this area. I have a seven year old prefab modular home that is very well insulated. I wanted to heat the open floor plan of the first floor which is 825 sq feet. The outside temperature was 50 degrees and I set the heater on 70. The farther away from the heater the less it heated. The manufacturer stated it will heat up to a 1000 sq feet. The heater is made in China. I decided to use it in the master bedroom which includes a walk in closet, and master bathroom. It worked great there and it's about 400 square feet. It's a nice looking heater and I like the remote control. The heater did smell the first couple of days but got better after a while. If you're looking to heat up to 1000 sq. feet you may be disappointed. I like the heater. I purchased this heater at Northen Tool on sale for plus shipping.

Honest reviews on Duraflame Infared Quartz Electric Portable Heater Air Purifier

I purchased this heater with the hopes of saving a little money on my oil bill this winter. With 2 little ones and a wife at home all day, heating the whole house when everyone is downstairs in 3 rooms didn't make a lot of sense. After reading a fair number of reviews, I decided to take a chance on this unit. We haven't gotten our 1st electric bill yet, but we've been using it almost every day. This unit takes about 45 60 minutes to reach full heat output, but once it does, boy does this thing cook. I have been able to lower my thermostat 3 degrees and have a warmer downstairs than with the furnace alone. Turned up, the space downstairs becomes uncomfortably hot. Our furnace is cycling on noticeably less than before when this is in use (my thermostat is located about 25 feet away from the heater, on the far side of a wall). The heat is even, the fan noise isn't any louder than our forced-air HVAC, the front grill doesn't get hot to the touch (the heating elements are contained within the body of the unit), the cabinet is very attractive and blends-in well with our furniture. Plus, it is well-made and comes with a remote. So far, I am very happy with this heater.

** update 11/17/2012 **

This unit works so well we're going to buy a 2nd one for another room. Drawing only 1500W also makes this an option when running on generator power, if you don't have a transfer switch installed (we will, but don't yet). This one's a keeper.

Find helpful customer reviews and review ratings for Duraflame Infared Quartz Electric Portable Heater Air Purifier

Use in an older home not very well insulated and it gets comfortable within 2 hrs of starting. Works well for the cold basement too! Have it set on 74, hasn't gotten below 30 deg outside yet but have no doubt with a top heat of 97 it will handle below zero weather! Strong smell on 1st startup and a lil noisy for some consumers.

Buy Fom Amazon Now

Wednesday, August 13, 2014

Review of Fire Sense Stowe Electric Fireplace Stove

Fire Sense Stowe Electric Fireplace Stove
Customer Ratings: 5 stars
List Price: $229.99
Sale Price: $180.20
Today's Bonus: 22% Off
Buy Now

Looks like the real thing.Moderate heat for large room 24X24 Put a fern on top and it looks sharp with the life like flames and embers on the logs worth the extra money ;)

Click Here For Most Helpful Customer Reviews >>

Good little stove. Looks very realistic and big enough not to be swallowed up by a large room and small enough for smaller spaces. Nice looking flame, puts out good heat. Would be five stars, but mechanism for flame has some mechanical noise, but it is not too obtrusive.

Best Deals for Fire Sense Stowe Electric Fireplace Stove

I shopped long and hard for purchasing an electric stove and totally love this one. The majority of them are too short but this one is taller so it looks better in a larger room. I would have given it 5 stars but sadly it only rates 4 stars because the directions for attaching the legs is lacking. Otherwise the stove is very well built and serves and looks great.

Honest reviews on Fire Sense Stowe Electric Fireplace Stove

This is the best. The most realistic I've ever seen. Well worth the money. I will buy another one in the future for another room.

Find helpful customer reviews and review ratings for Fire Sense Stowe Electric Fireplace Stove

This fireplace has been a staple in my living room since I purchased it. The set up and instal was simple. The actual "fire" looks a lot better than anticipated. The heat that it puts out isn't too terrible great, but you shouldnt expect it to be with an electric fireplace. It works great for my living room, which is a medium size. It would be a great fit for an office or bedroom and the heat would be adequate.

Buy Fom Amazon Now

Wednesday, April 16, 2014

STEELCAT Steel Honeycomb Catalytic Combustor (CS-257 / 1P259 #2) Review

STEELCAT Steel Honeycomb Catalytic Combustor for VERMONT CASTINGS wood stoves. Measures 2.5' wide by 13' long by 2' thick. STEEL HEATS UP FASTER THAN CERAMIC RESULTING IN MORE HEAT RECOVERY!. A worthwhile extra expenditure for better performance. Made in the USA by Condar, 'The Combustor Experts'. GASKET INCLUDED
Customer Ratings: 3.5 stars
Buy Now
Having owned three Vermont Casting Defiant catalytic stoves (Yes; I'm a very happy V.C. customer of 30 years), I can state that the STEELCAT is by far the best combustor I've ever owned. It does everything Condar states; Heating up MUCH faster than any of the OEM combustors. We immediately found that we are using less wood due to longer burn time. I waited six weeks before writing this review on it's performance. I hope I ham as pleased a few years from now if it also outlasts the V.C. orginal.

Click Here For Most Helpful Customer Reviews >>

Purchased one of these to replace a crumbling ceramic unit. Seemed like a good idea at the time. At the end of one season, the stove became slugish and I was unable to engage the cat by the end of the season. Just pulled it out and the cells have corroded and disintegrated and completely plugged the unit. Be clear, this is not a creosote plug. Would not recomend this unit to anyone.

Best Deals for STEELCAT Steel Honeycomb Catalytic Combustor (CS-257 / 1P259 #2)

...unit is breaking down. The metal fins are crumbling. Under the warranty I can get a replacement for about $100, but why would I want to base upon this performance. I so wanted to by American too. I'm sticking with the ceramic.

Honest reviews on STEELCAT Steel Honeycomb Catalytic Combustor (CS-257 / 1P259 #2)

Replaced Cat after toooo many years in my Defiant Encore . Felt that I would buy the best that was available . Stove seems to be able to go to the converter earlier and the logs last longer . Will let you know at the end of the season but at this time I am completly happy .

AFTER the season still feel it was worth the price . Worked like I had hoped ,stove worked like new .

Find helpful customer reviews and review ratings for STEELCAT Steel Honeycomb Catalytic Combustor (CS-257 / 1P259 #2)

Don't buy this one, buy the ceramic catalytic. We went on the reviews and bought the steel catalytic and it crumbled within 3 months. This winter (2011-2012) has been warmer than usual and the stove use has been lighter than in years past. We called Condar and they replaced it with the ceramic catalytic with no problem! We think that Condar is a great company and stands behind their products!

Buy Fom Amazon Now

Sunday, March 16, 2014

Cheap New EdenPURE Infrared Heater US1000

New EdenPURE Infrared Heater US1000
Customer Ratings: 3.5 stars
Buy Now
I have a medium open living/dining area with high ceilings. I, like most wanted something to help with the heating costs. This machine worked well during the day when I had it running on high with the fireplace going and would warm the room to 70-71 degrees. At night, I put the central gas heat on 64, turned off the fireplace and left the Edenpure running on high. When I woke up, the room was 64, just as I had set the thermostat on the central heat. So needless to say, it did not work at all as the main heat was kicking on. I also do not like the fact that there is no digital thermostat but just several lines to indicate the level of heat and there is no timer. I actually have ordered another similar unit from Home Depot that has both of these features, has two more additional heating elements and is supposed to heat up a 1500 sq foot room and only cost $259 with free shipping. And of course the added bonus of being able to return it directly to the local store if I do not like it. This Edenpure I purchased is rated to heat 1000 sq feet. So, I personally cannot recommend this product.

Click Here For Most Helpful Customer Reviews >>

Consumer Reports, February 10, 2010:

Heating Claims Don't Add Up

Manufacturers of electric space heaters want you to believe that using one of their devices will lower your heating bill. Lowering your home's thermostat(s) and using your main heating system less in tandem with a space heater--called zone heating--will cut your utility bill. (Every degree you lower the thermostat(s) can save you about 2 percent on your heating bill.) But keep in mind that based on current national average prices and adjusting for the energy losses due to burning a fuel, heating with electricity is about two and a half times more expensive than heating with gas, the most common heating fuel in this country.

EdenPure suggests that "you can turn the heat down in your house as low as 50°F, yet the room you are in will be warm and comfortable. When you move to another room, the EdenPure goes with you. Its wheels make relocation a snap." That scenario assumes that you have to heat only a single room to heat at a time or that you own multiple EdenPure space heaters; that once you're in a room you stay put and don't move around the house; and that you're willing to keep the rest of your home at a chilly 50°F. Lowering the thermostat(s) by 3°F would likely result in minimal discomfort for you and your family, but are you willing to keep your home at 50°F?

...Its design essentially negates the radiant-heating effect, so it operates more like a typical fan-forced convection heater. While a fan can help mix the room air, there is typically some temperature variation, with cooler air near the floor and warmer air near the ceiling.

Humidity Information Seems All Wet

EdenPure says its heaters "protects the humidity level and air quality important to breathing comfort and personal health," and also notes that "Heat from the copper tubing rides the humidity in the room and provides moist, soft heat--ceiling-to-floor, wall-to-wall--without reducing oxygen or humidity."

Simply put, when you heat a room with any space heater and don't also have an additional source of humidity, say a humidifier, the total moisture in the air in that space will stays the same but the relative humidity will go down, not up. That's true for every space heater we've tested...

Best Deals for New EdenPURE Infrared Heater US1000

We needed a heater for our fifth wheel and I prefer products made in the USA (especially electric products), so after reviewing many heaters decided on the Edenpure. It really does the job! Saved quite a bit on propane and heats the whole 5th wheel. Plus it's a lot quieter than our furnace. We've been extremely pleased.

Honest reviews on New EdenPURE Infrared Heater US1000

Years ago,I purchased two Edenpure, very efficient and safe,model Gen 3 heaters. One of the heaters was a refurbished model. Both heaters worked great, until the refurbished heater stopped producing heat. I called the company, being that a refurbished hearter did not carry a regular warranty, I could not get help..not even a timely answer from the on line trouble shooting expert. It was the Christmas vacation week for my grandchildren who were coming to stay with me in upstate NY., and without two heaters, my home is really cold. After a long wait for the online company representative to get back to me, only for him to write back stating that he lost my e-mail and what was my heater problem. I wrote him back, but again never recieved answered, and with the nearest repair shop for these heaters hundreds of miles away from my home, I went to BJ's store to see what brands of heaters they had available. To my surprise BJ's had 1 Edenpure US1000, which I purchased. Edenpure has made some changes;the US1000 heater uses three bulbs instead of the 5 bulbs as in the original heaters and I believe runs a bit cooler, not giving the wide spectrum of heat output as the older models did. The Edenpure is a safe and attractive looking heater, and I feel very comfortable when my grndchildren are at my home, knowing that they will not be harmed by any heating elements.

Find helpful customer reviews and review ratings for New EdenPURE Infrared Heater US1000

I bought 2! The heater works very well. We run it in the room where our TV and thermostat are located. It raises the temperature to around 72 degrees, which keeps the heat from coming on. As long as we stay in that room, it's nice. The rest of the 1st floor of the house gets very cold unless we run the second heater in another room. These are idea for trailers or small homes. If you have a bigger house you may want to buy a couple of them but, would you really be saving any money then???.

Buy Fom Amazon Now

Wednesday, January 15, 2014

Buy Uniflame Hand Carved Bellow, Cast Nozzle 20"Long

Uniflame Hand Carved Bellow, Cast Nozzle 20'Long
Customer Ratings: 3 stars
List Price: $79.95
Sale Price: $58.80
Today's Bonus: 26% Off
Buy Now

I expected a really nice bellows for the money I paid for this. It came looking cheap, with splits in the wood. Really, really disappointing.

Click Here For Most Helpful Customer Reviews >>

Bought this as a gift for my father. He loved it, and has actually found many uses for it. Good quality and shipping.

Thursday, December 26, 2013

ALL SEASON DOWN ALTERNATIVE MATTRESS TOPPER (Twin, Full, Queen Review

ALL SEASON DOWN ALTERNATIVE MATTRESS TOPPER - 230TC SHELL.
Customer Ratings: 4.5 stars
List Price: $149.99
Sale Price: $89.99
Today's Bonus: 40% Off
Buy Now

I have had this topper for about 6 months and I am very pleased with it. It has stayed fluffy and the fill has not shifted or bunched up.

Click Here For Most Helpful Customer Reviews >>

This is a fantastic product! You will probably sleep a little warmer than if you were on a bare mattress, but it doesn't create the kind of heat a foam topper would. This topper actually breathes pretty well, and is OH so cozy! And the fiber refluffs wonderfully!

Best Deals for ALL SEASON DOWN ALTERNATIVE MATTRESS TOPPER (Twin, Full, Queen

This mattress topper added noticeable comfort to my less expensive mattress. I plan on buying a second one. The filling didn't bunch up like typical feather beds do.

Honest reviews on ALL SEASON DOWN ALTERNATIVE MATTRESS TOPPER (Twin, Full, Queen

It arrived 2 days sooner than promised in excellent undamaged condition, exactly as described. I've only had it a week, but I did WEEKS of research before purchasing, reading thousands of user reviews on various toppers. Based on what I learned from those reviews, here is what I can say about this topper so far:

It appears to be well constructed, I have found no places on it where the stitching was weak or crooked, or anything like that. Oh, and each baffled square is evenly filled. I'd read some user reviews on other, similar toppers complaining of drastically uneven fill from one square to another, so I just wanted to put it out there that this topper does *not* have that issue.

I'm happy to report that it has stayed put on the mattress even though it does not have corner straps. Even before my mattress cover/protector arrived, it simply stayed where I put it on the mattress, under the sheet, unless I lifted the sheet and moved it deliberately. I was worried that would be a problem, but I'm pleased to report that it doesn't slide around.

There is minimal flattening of loft when I wake, and I simply smack the area I slept on with a side sweeping motion a few times before I make the bed, and it fluffs right back up to it's pre-sleep loft. This takes me all of fifteen seconds before I pull the top sheet up over the bed. I will be rotating/flipping it each time I change the sheets (weekly) to ensure this remains the case, as it is quite easy to do even by myself, and only takes a couple of minutes to do. I plan to do the same to the mattress itself on a monthly basis.

I do have to say, however, that I took the advice I'd read in a lot of user reviews on this and other sites, and ordered a king size topper for my queen sized bed. I'm so glad I did! Because it's large enough to hang off the sides of my bed a bit, I can push the small space between rows created by the channels even closer together, leaving no space between rows of squares on the topper at all. Because of this, it's even fluffier! SO SOFT. My mattress is firm and supportive, but the pressure point pain kept my fibromyalgia in constant flare. The softness that now rests atop that supportive firmness has reduced my pressure point pain by quite a large measure, and my chronic flare is reducing in severity with each day that goes by.

I spun the topper two days ago when I washed the sheets. (Next time I'll flip it it's lightweight enough for me to do that easily, and I believe it will keep it in new condition longer.) Now it is about two inches short at the foot of the bed but my toes don't care, they don't reach that far! This left even MORE extra width on the sides, which I fluffed and moved the rows together to eliminate. This thing now appears to be five inches high on top of my mattress. My 18 year old son laid down on my bed for a minute to talk to me, and was immediately out like a light. He is telling his friends how comfy my bed is now, and he has twice begged to take a nap on my bed. That hasn't happened since he was four.

And it doesn't sleep hot like memory foam! Previously I had a memory foam pillow top mattress, and that thing was miserable for holding the body heat I'd often wake in a sweat. This topper says it's all-weather, and I do believe it's going to live up to its title. I have yet to wake too hot or too cold, and we have already had nights when it was 80 degrees out, and also nights when it dropped to 63 in the house by morning. I've slept temperature comfortable every night on it so far.

When the time comes to clean it (which will be a long while, as I've made sure to add a mattress protector over the topper, under the sheet), I will be more than happy to take it to a Laundromat, put it in a large capacity front-loading washer and run it on the gentlest cycle. I won't even mind putting it in the largest capacity dryer and waiting while it fluff/dries on NO HEAT. Why? Because I used to work in a dry cleaners/laundry, and I know how expensive it would be to dry clean. Think about the cleaning requirements before you buy a topper! Call a nearby dry cleaners and get an estimate quote on cleaning a mattress topper that is Dry Clean Only, and keep that info in mind before you purchase your topper. Machine washable is the way to go. No more often than this topper will need cleaned, I do not have a problem with the "hassle" of going to the Laundromat. I'll simply take my Kindle and enjoy a good book while I wait on the machines. :)

Find helpful customer reviews and review ratings for ALL SEASON DOWN ALTERNATIVE MATTRESS TOPPER (Twin, Full, Queen

This is the most wonderful bed topper like sleeping in a cloud of comfort. My husband can barely get out of bed in the morning. This is the most comfortable addition to a night's sleep. It is very reasonably priced also. Every 2 weeks I switch the direction it is in so that we get more fluff, so that our bodies are on the part that our feet had been. That works well. I would recommend this to anyone. It has made a huge impact on how sound we sleep it also motivated me to buy some really nice Egyptian cotton sheets WHEW, wish I was in bed now HA

Buy Fom Amazon Now